Intelligent Digital
Hand Held Display


The IHH500 Hand Held Portable Digital Display is FUTEK’s solution that can be easily integrated to work with Load Cells, Torque Sensors and Pressure Sensors. The IHH500 has an input range of up to +/-500 mV/V. Beside the mV/V input, device accepts amplified output sensors in range of ± 12 VDC or up to 30 mA. It also has two individual relays and two Analog voltage and Analog current output. This device provides additional 24 VDC / 5VDC as power supply for sensors with built-in amplifier. FUTEK’s Hand Held display also supports TEDS which makes it easy to switch between different sensors. A high speed/ low noise/ high resolution (24 bits) ADC is integrated in the device to make it suitable for high accuracy measurements. The IHH500 uses rechargeable battery with long life time. This particular Digital Display also has the capability of displaying values onto a computer through a USB link.

 Display Resolution 3  7 Digits
 Excitation ( ? )  5  Vdc
 Nonlinearity ( ? ) -0.01  0.01 % of R.O.
 Operating Temperature ( ? ) -4  158 F
 Sample Rate 5  4800 Samples / Sec
 Analog Output 0  5 Vdc
 Capacity   2 mV/V nom. ( ? )
 Communication Interface    USB
 Power Supply  12  Vdc
 Rated Output ( ? ) 1.995  2.005 mV/V nom. ( ? )
 Storage Temperature -22  176 F
 Input Range -500  500 mV/V nom. ( ? )
 Input Range   30 mA
 Bridge Resistance 30   Ohms nom.
 Weight  1.9  lbs
 Analog Output -5  5 Vdc
 Analog Output 0  20 mA
 Analog Output_4 4  20 mA
 Analog Output_5 0  25 mA
 Analog Output_6 5  25 mA
 Input Voltage 100  240 Vac
 Input Range -12  12 Vdc
 Error -0.15  0.15 % of Load
 Capacity 0  10 Vdc
 Rated Output ( ? ) 0  10 Vdc
 Error -0.06  0.06 % of Load
 Capacity 4  20 mA
 Rated Output ( ? ) 4  20 mA



FUTEK's IDA100, a digitally configurable amplifier with USB output, is an instrument offering users the unique ability to have both an amplified analog and digital output. The dual output features of the IDA100 are powered solely by the 5V output from the USB. This device also has a software selectable ±5V and ±10V analog output with a low noise value of 12 mVp-p (millivolt peak-to-peak) and a bandwidth of 1 kHz. Similar to our IAA analog amplifier series, the IDA100 was also designed with an integrated 35 mm DIN rail clip. The high retention USB connector ensures that the power supply to the IDA100 will not be jeopardized should the connector experience a tug or pull during use.

  • USB 2.0 Communication Link
  • USB Bus-Powered (5V)
  • Input/Output Short Circuit Protection
  • Low Noise Analog Output Value of 12 mVp-p
  • User Selectable Sampling Rates from 5 – 4800 SPS
  • Software Selectable Excitation Voltages of 5 VDC and 10 VDC

Mount Display


FUTEK’s IPM650 Panel Mount Display is a multi-purpose display compatible with strain gauge and amplified output sensors. Whether your application calls for the use of load cells, pressure sensors or torque sensors, our IPM650 is a reliable tool for continuous automation applications, yet precise enough for delicate medical testing.

  • 21k Point Data Logging
  • Bridge Resistance Measurement
  • Keypad Options (Track/Hold, Peak/Valley Reset, Unit, Tare/Gross, Shunt, Channel, Display, Menu)
  • First Peak/ First Valley Feature
  • User Friendly Navigation Menu
  • Shunt Calibration
  • Universal Unit Conversion
  • 14 Sensor Profile Storage
  • Supports IEEE 145.4 Standard (TEDS 30 & 33)



The new USB220 High Resolution USB Output Module eliminates the need for an analog amplifier, power supply, and display equipment. The module is supplied by PC power through a USB Cable, providing excitation voltage for the sensor. The analog output voltage of the sensor is then digitized and processed by a microprocessor using the integrated high resolution (24 bits) analogue to digital converter (ADC). The on-board USB transmitter and receiver device allows the microprocessor to communicate with the PC by means of the USB link. The USB integration works hand in hand with SENSIT Test and Measurement software, which allows users to monitor the actual output of the sensor in real time. This is calculated based on the calibration values stored in the on-board memory. The easy plug-and-play connection gives you the power to monitor the sensor output and enjoy measurement that is less affected by noise, temperature variation, and excitation. The USB220 product is designed and manufactured by FUTEK in the USA.

Product Highlights

  • USB 2.0 Communication Link
  • USB Bus-Powered
  • Integrated Shunt Call
  • Input/Output Short Circuit Protection
  • Streaming ASCII Output
  • CE Criteria A Certification for Aerospace and Medical Grade Devices
  • Supports mV/V type sensors
 Excitation ( ? )  4.6  Vdc
 Nonlinearity ( ? ) -0.01  0.01 % of R.O.
 Operating Temperature ( ? ) -13  185 
 Sample Rate 5  4800 Samples / Sec
 Communication Interface    USB
 Power Supply  5  Vdc
 Storage Temperature -40  257 
 Input Range -3.4  3.4 mV/V nom. ( ? )
 Bridge Resistance 50  5000 
 Weight  23  Gram



SENSIT Test and Measurement Version for IDA100, IHH500, IPM650, USBxxx. Compatible w/ Windows XP, Vista, 7, 8 and 10.

Download Datasheet