capaNCDT MD6-22

capaNCDT MD6-22

The capaNCDT MD6-22 capacitive dual-channel handheld gauge is used for mobile and precise measurement of gaps. This measuring device impresses with high accuracy, intuitive operation and long battery life. Thanks to preset measurement modes, the handheld gauge is immediately ready for use. Compatible with all capacitive sensors from Micro-Epsilon, the MD6-22 is used in different measurement tasks, e.g. for rotor gap monitoring in wind turbines and alignment of rollers in plant and machinery.

  • Measurement channels: 2
  • Resolution 0.02 % FSO
  • Linearity ≤ ± 0.2 % FSO
  • Frequency response 100 Hz
  • Storage of measurement data on SD card
  • Weight 500 g (without magnetic holder)
  • Battery life 5h
  • Touch display
  • Preset measurement modes for fast commissioning
Download Datasheet

capaNCDT 6500


Capacitive displacement sensors are designed for measurement tasks that require extremely high precision. The capaNCDT 6500 capacitive multi-channel system is ideally suited to reliable measurements down to sub-nanometre resolution. The controller offers a maximum response rate of 7.8kHz (digital, with up to four channels) or a frequency response of 8.5kHz. As well as an analog output, an EtherCAT(R) interface is also available. EtherCAT enables accurate data transmission in real time, with high speed integration into the existing measurement environment and synchronization of two systems. Set up and configuration of the capaNCDT 6500 system are carried out easily using a web browser.

  • Measuring ranges (mm):
    0.05 | 0.2 | 0.5 | 0.8 | 1 | 2 | 3 | 5 | 10
  • Resolution max. 0.0375nm
  • Linearity max. 0.01µm
  • Fréquence limite 8.5kHz (-3dB)
  • Data rate (digital output) 7.8kHz
  • Analog output (voltage/current)
  • Ethernet, EtherCAT
  • Modular – up to 8 channels
  • External or internal preamplifier
  • User-friendly set up and configuration via web interface
Download Datasheet

capaNCDT 6200

capaNCDT 6200

The capaNCDT 6200 is the first multi-channel measurement system that is entirely modular. The controller can easily be extended up to four synchronized channels to support flexible applications. All capacitive displacement sensors by Micro-Epsilon can be operated using the capaNCDT 6200 controller. The integrated Ethernet interface supports parameterization and measurements via web interface. The DL6230 demodulator is available for high resolution measurements. For high-speed measurements up to 20kHz, the capaNCDT 6222 system is available.

  • Probe ranges (mm):
    0.05 | 0.2 | 0.5 | 0.8 | 1 | 2 | 3 | 5 | 10
  • Resolution. < 0.2 nm
  • Linearity 0.01 µm
  • Dynamic response: 20 kHz (-3dB)
  • Data rate (Digital output) 3.9kHz
  • Modular – up to 4 synchronized channels
  • Analog output (Voltage/ Current)
  • Easy set up and configuration via WEB interface
  • Math functions for thickness or differential calculations
  • additional digital linearization possible
Download Datasheet

capaNCDT DT61x0/IP


The capaNCDT DT61x0/IP is an industrial-grade, capacitive sensor system for displacement, distance and position measurements. Consisting of a sensor, a sensor cable and a controller, the measuring system is ready for use without any on-site calibration. Due to its very good temperature stability, immunity to magnetic fields and robust design that is protected to IP68, the capaNCDT DT61x0/IP is used for industrial measurement tasks such as air gap measurement in generators and regulation of plant and machinery.

  • Measuring ranges (mm):
    0.5 | 1 | 1.25 | 2 | 3 | 4 | 6
  • Linearity max. 1 µm
  • Resolution max. 0.05 µm
  • Voltage output
  • Digital RS485 interface (DT6120/IP)
  • Dust-proof and watertight aluminum die-cast housing (IP68)
  • Robust and temperature-resistant sensor cable
  • Broad sensor range (flat/cylinders/threads)
Download Datasheet

capaNCDT 6110

DT6112 controller

The capaNCDT 6110 is a new capacitive single-channel displacement measurement system consisting of a compact controller, a sensor cable and the sensor.

Due to the miniaturized controller and its easy operation, the capaNCDT 6110 is ideally suited for the integration in machines and systems. With the possible power supply is between 9 – 36 V, the system can also be operated on a battery in passenger cars or trucks. The measurement values are output via a voltage output. The capaNCDT measurement system is a great solution for many different applications and is compatible with all Micro-Epsilon capaNCDT sensors.

  • Measurement ranges (mm):
    0.05 | 0.2 | 0.5 | 0.8 | 1 | 2 | 3 | 5 | 10
  • Linearity: max. 0.025 µm
  • Resolution: max. 0.005 µm
  • Analog output (voltage)
  • Digital output RS485 (controller DT6120)
  • Miniaturized controller
  • Supply voltage 24 VDC/55 mA (9 - 36 V)
  • Ideally suited for measurements requiring high precision and stability
Download Datasheet