Rotary Torque Sensor

FUTEK · Torque Measurement Solutions

Rotary Torque Sensors

FUTEK rotary torque sensor catalogue for dynamic torque measurement on rotating shafts and drive systems. Explore TRS shaft-to-shaft, TRD square-drive and TRH hex-drive families for torque auditing, motor testing and rotating equipment analysis.

Dynamic torque measurementRotating shaft applicationsEncoder options available3 rotary sensor families
Loading models…
Compare selected models (0)

This catalogue is organised by rotary sensor family, not every individual orderable configuration. Torque range, maximum RPM, drive dimensions, encoder availability, output and connector vary by model and order code; confirm current FUTEK documentation before specifying or purchasing.

Product Overview

Dynamic Torque Measurement for Rotating Systems

Rotary torque sensors measure torque in rotating systems, typically installed inline between a drive and a load or connected through a rotary drive interface. The suitable family depends on the torque range, speed (RPM), shaft or drive geometry, encoder needs, signal transfer, output and test environment.

Applications

Typical Rotary Torque Applications

01 · Industrial

Rotating Torque Auditing

Measure torque from rotating shafts and drive systems during dynamic tests.

02 · Testing

Motor & Drive Testing

Evaluate motor output, drive performance and torque behaviour under load.

03 · Measurement

Dynamometers & Test Rigs

Integrate a rotary sensor into test stands for torque, speed and power analysis.

Selection Guide

Four Checks Before Selecting a Rotary Torque Sensor

01. Torque Range

Define minimum, normal and peak torque, including transient or overload conditions.

02. Mounting Interface

Match flange, square drive, shaft or screwdriver interface to the tool and fixture.

03. Alignment & Loading

Confirm clockwise/counter-clockwise requirements and minimise side loads or off-axis moments.

04. Output & Instrumentation

Verify output, excitation, connector and compatibility with the amplifier, DAQ or PLC.

Sciengate Application Support

Need Help Selecting a FUTEK Rotary Torque Sensor?

Prepare the expected torque range, mounting interface, loading direction, output signal and application details. Use the catalogue detail and comparison panels to shortlist a family, then verify the exact model configuration with current FUTEK documentation.

Torque range reviewMounting interfaceSignal compatibilityConfiguration verification