BeanDevice AN-420
Wireless Analog Data Acquisition System with 4-20mA (Current Loop) Inputs and Built-In Data Logger
- Remote monitoring
- Built-in test equipment
- Condition monitoring
- Structural Health Monitoring (SHM)
- Wireless analog data acquisition system with 4-20 mA (current loop) inputs, 4 analog channels
- Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E)
- Maximum Radio Range: 650 m (L.O.S)
- Excellent radio link budget thanks to our antenna diversity innovative design
- High measurement accuracy: < 0.08%, 16-bit of resolution
- Programmable power supply (4.5VDC to 20VDC) for external sensors
- Maximum sampling rate: 400 samples per second
- Current consumption in sleep mode: < 45 uA @3.3V, external sensor is switched off
- Embedded Data Logger: up to 1 million data points (with events dating)
- Integrated Lithium-Polymer rechargeable battery with industrial battery charger (8-28VDC)
- Watertight (IP65 | Nema 4) aluminum casing
- TimSync function: Time-synchronization over the Wireless Sensor Networks with an accuracy of ±2.5 ms
- High measurement accuracy:
- Maximum Radio Range : 1000m (L.O.S)
- Streaming Packet Mode : 400 SPS (samples per second)
- Embedded Datalogger : up to 1.000.0000 data acquisition records (with events dating)
- OPC server allowing real time access from your IT system to the BeanScape® (available on BeanScape® Premium+)
- Entirely autonomous system with an integrated Lithium-Ion battery charger
- « Plug and Play » installation : requires no knowledge of wireless technology
- IP65 Watertight aluminium enclosure suitable for harsh industrial environment
- M12 Sensor connector with IP67 degree of protection
- Option: Calibration certificate linked to national and international standards (COFRAC)
- Time Synch function : The Device is synchronized with your PC/PLC clock with an accuracy less than 5 ms
BeanDevice AN-420 XTender
Self-powered wireless data logger with 4-20mA current loop inputs
The BeanDevice® AN-420 Xtender is a wireless data logger with 4-20 mA current loop inputs. Special care is taken in the analog signal conditioner design with an accuracy of ±0.08% (FS) and a dynamic range of 16-bits.
The sensor is directly powered by a high accuracy and adjustable DC/DC converter integrated inside the device. The excitation voltage is remotely configurable through the BeanScape® (4.5 to 20V). This device is powered by Lithium-thionyl chloride primary battery with a capacity of 6.5 Ah.
Characterized by a watertight (IP65) and small (146.05 mm x 65.5 mm x 33.5mm) aluminum enclosure, an ultra-low power (30 µA in sleeping mode), an integrated data logger that can store up to 1 000 000 data acquisitions, as well as a maximum wireless range of 1 Kilometer (L.O.S.), this wireless device is well suited for all types of industrial applications.
While the vast majority of wireless sensors show their limits in harsh industrial environment, the BeanDevice® AN-420 Xtender integrates an innovative antenna diversity design, boosting the radio link quality in environments subject to random and diverse disturbances. Antenna diversity improves both the quality and reliability of a wireless link by 30%.
The wide range of industrial protocols available on our wireless device (ModBus TCP/RTU/ASCII and OPC DA) enable an easy integration into your IT environment.
The BeanDevice® AN-420 Xtender is suitable for the following applications:
- Remote monitoring
- Built-in test equipment
- Process supervision
- Self-powered wireless data logger with 4-20mA current loop inputs
- 100% Wireless Technology : the sensor power supply is provided by BeanDevice® (4.5V to 20V)
- Excellent radio link budget due to the antenna diversity & a high power RF front-End designed by BeanAir
- Current consumption in sleeping mode : < 30 uA whatever the sensor technology
- Number of Input Channels : 4 channels
- High measurement accuracy: < 0.08%
- Maximum Radio Range : 1000m (L.O.S)
- Embedded Datalogger : up to 1.000.0000 data acquisition records (with events dating)
- OPC server allowing real time access from your IT system to the BeanScape® (available on BeanScape® Premium+)
- Entirely autonomous system with an integrated primary cell
- « Plug and Play » installation : requires no knowledge of wireless technology
- Extended operating temperature range: – 40°C to +85°C
- IP65 Watertight aluminium enclosure suitable for harsh industrial environment
- M12 Sensor connector with IP67 degree of protection
- Option: Calibration certificate linked to national and international standards (COFRAC)
- Time Synch function : The Device is synchronized with your PC/PLC clock with an accuracy less than 5 ms
BeanDevice AN-V
Wireless Data logger with analog voltage inputs (±5V ou ±10V)
The BeanDevice® AN-V is a wireless data logger with 4-20 mA current loop inputs. Special care is taken in the analog signal conditioner design with an accuracy of ±0.08% (FS) and a dynamic range of 16-bits.
The sensor is directly powered by a high accuracy and adjustable DC/DC converter integrated inside the device. The excitation voltage is remotely configurable through the BeanScape® (4.5 to 20V).
Characterized by a watertight (IP65) and small (146.05 mm x 65.5 mm x 33.5mm) aluminum enclosure, an ultra-low power (30 µA in sleeping mode), an integrated data logger that can store up to 1 000 000 data acquisitions, as well as a maximum wireless range of 1 Kilometer (L.O.S.), this wireless device is well suited for all types of industrial applications.
This device comes with TimeSync function. It provides time-synchronization over the wireless sensor network and helps to enhance user experience on data correlation.
While the vast majority of wireless sensors show their limits in harsh industrial environment, the BeanDevice® AN-V integrates an innovative antenna diversity design, boosting the radio link quality in environments subject to random and diverse disturbances. Antenna diversity improves both the quality and reliability of a wireless link by 30%.
The wide range of industrial protocols available on our wireless device (ModBus TCP/RTU/ASCII and OPC DA) enable an easy integration into your IT environment.
The BeanDevice® AN-V is suitable for the following applications:
- Remote monitoring
- Built-in test equipment
- Process supervision
- Wireless data logger with analog inputs (±5V or ±10V)
- Unipolar or bipolar voltage measurement (software configurable):
- bipolar: ±5 V , unipolar: 0–10 V
- bipolar: ±10V, unipolar: 0-20 V - 100% Wireless Technology : the sensor power source is provided by the BeanDevice® (4.5V to 20V)
- Excellent radio link budget thanks to the antenna diversity & a high power RF Front-End designed by BeanAir
- Current consumption in sleeping mode : < 30 μA whatever the sensor technology
- Number of Input Channels : 4 channels
- High measurement accuracy: < 0.08%
- Maximum Radio Range : 1000m (L.O.S)
- Streaming Packet Mode : 400 SPS
- Embedded Datalogger : up to 1.000.0000 data acquisition records (with events dating)
- OPC server allowing real time access from your IT system to the BeanScape® (available on BeanScape® Premium+)
- Entirely autonomous system with an integrated Lithium-Ion battery charger
- « Plug and Play » installation : requires no knowledge of wireless technology
- IP65 Watertight aluminium enclosure suitable for harsh industrial environment
- M12 Sensor connector with IP67 degree of protection
- Option: Calibration certificate linked to national and international standards (COFRAC)
- Time Synch function : The Device is synchronized with your PC/PLC clock with an accuracy less than 5 ms