DAT 1400 Weighing Transmitter

- Acquisition frequency signal A / DC up to 1000 Hz
- DATALOGGER function (optional)
- Capacitive keyboard
- Bus contemporary Availability of Field and Analog Output
- Removable screw terminal blocks
- Mounting Type: DINRAIL & front panels (optional)
- All Bus Available range: Profinet, EtherCAT, Ethernet IP, Ethernet
- Future Options: - Two weighing channels indipendenti
- Analog voltage input or current
- Connection (RS485 and power supply) to I-BOX external
POWER TOOL: | 12-24 Vdc ± 15% - absorbed power 5 W |
Measuring range: | ÷ -3.9 +3.9 mV / V |
Input sensitivity: | 00:02 MicroV / div |
Linearity: | <0.01% FS |
Thermal drift: | <0.001% FS / ° C |
Display: | 6 digits, red 7-segment LED, height 14mm |
A / D converter: | 24-bit |
Internal resolution: | > 16,000,000 points |
Signal Acquisition frequency: | 12 to 1000 Hz |
Viewable resolution: | 999,999 displayable divisions on net weight |
Divisions value (selectable): | x1, x2, x5, x10, x20, x50 |
Set Decimal: | 0.0; 0:00; 0.000; 0.0000 |
Filter: | Selectable 0.5 ÷ 1000 Hz |
Keyboard: | 4 capacitive buttons |
load cells Power supply: | 5 Vdc (max 8 350-Ohm load cells in all) |
Operating temperature: | -10 / + 50 ° C (max 85% relative humidity without condensation) |
Storage temperature: | -20 / + 70 ° C |
Logic outputs: | 2 optoisolated; MAX 24 Vdc / 100mA cad |
Logic inputs: | 2 optoisolated PNP at 24 VDC (external power supply) |
Serial Ports: | 1 USB device + 1 + 1 RS232C RS485 / Fieldbus; ASCII protocol or Modbus RTU |
Peak Hold function: | for dynamic measurements |
Optional analog output: | optoisolated 16-Bit Voltage: 0 ÷ 5/10 V (R min10 K Ohm), Current: 0/4 ÷ 20 mA (R max 300 Ohm). |
Linearity analogue output: | <0.02% FS |
Thermal analog output drift: | 0.001% FS / ° C |
Microcontroller: | ARM Cortex M0 + 32-bit, 256KB Flash reprogrammable on-board USB |
Data storage: | 64 Kbytes expandable to 1024 Kbytes (option) |
Regulatory Compliance: | EN61000-6-2, EN61000-6-3 EMC; EN61010-1 for Electrical Safety |
Electric connections: | Removable screw terminal blocks 5 mm pitch |
Weight Transmitter DAT 11

DAT 11
Among the weight transmitters, DAT 11 is the fastest to receive, convert and transmit data thanks to a more performing A/D converter. Thanks to its small size and compact design, the DAT 11 weight transmitter can be inserted in any work environment without taking up too much space. DAT 11 is a customizable product that has a mechanical keyboard with a programmable key block from which it is possible to manually set the weight filter with predetermined values or with individually adjustable parameters. The DAT 11 weight transmitter features removable screw terminal blocks, selectable logic input function, voltage or current analog input, unipolar or bipolar analog output, RS485 junction box connection and peak hold function for dynamic measurements. DAT 11 is a product in step with the times. It complies with EN45501, and the Fieldbus data are updated to 125Hz. Compared to traditional weight transmitters, DAT 11 contains a USB port which allows the firmware update, the connection to the Optimation software and the connection to TESTER 1008, which facilitates calibration and troubleshooting. DAT 11 is able to perform various calibrations: "Dead Weight", "Theoretical" and "Data Sheet". In addition, it presents the linearization of the weight calibration on 5 points. Developed specifically by Pavone Weighing Systems and installed free of charge in the weighing instrument, the Optimation software allows you to simplify and perform various operations such as configuring the instrument and correctly and safely saving data through the DATALOGGER function.
Technical Specifications
Measuring range: -7.6 ÷ +7.6 mV/V |
Input sensitivity: 0.02 µV/count |
Full scale non-Linearity: <0.01% |
Gain drift: 0,001% FS/°C |
Display: 6 digit, 7-segment LED red, height 8mm |
A/D Converter: 24 bit |
Internal Resolution: > di 16.000.000 points |
Visible resolution (in divisions): 999999 |
Divisions value (adjustable): x1, x2, x5, x10, x20, x50 |
Decimal figures range: 0 ÷ 4 |
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation) |
Storage temperature: -20 ÷ +60°C |
Filter: 0.1 ÷ 250 Hz |
Excitation voltage: 4 Vdc (max 4 -350 Ohm- load cells) |
Logic output: 2 optoisolated outputs; max 24 Vdc/100 mA each |
Logic input: 2 optoisolated inputs 24 Vdc PNP (external power supply) |
Serial port: 1 USB-C device + 1 RS232C and 1 RS485 with ASCII or Modbus RTU protocol or 1 Fieldbus |
Analog output Non-Linearity: <0.03% |
Temperature drift analog output: 0,002% FS/°C |
Power supply: 24 Vdc ±10% - power consumption 5 W |
Microcontroller: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard via USB |
Data storage: 32 Kbytes expandable up to 1024 Kbytes (optional) |
Regulatory compliance: EN61000-6-2, EN61000-6-3, EN61326-1 for EMC, EN61010-1 for Electrical Safety |
Weight Transmitter UWT 6008

UWT 6008
The UWT 6008 weight transmitter comes from the Pavone Systems experience. It is a unique product in the weight transmitter family and is ideal for all industrial applications where it is necessary to know the load distribution on the different cells. It is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failure of one of the cells, unbalanced weight distribution. The emulative control allows the continuity of work of the weighing system even in case of failure on one of the load cells, up to the replacement of the same. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.
Technical Specifications
Measuring range: -3.9 ÷ +3.9 mV/V |
Input sensitivity: 0.02 µV/count |
Full scale non-Linearity: <0.01% |
Gain drift: < 0.001% FS/°C |
Display: 128 x 64-pixel graphic LCD |
A/D Converter: 24 bits |
Internal Resolution: > 16.000.000 points |
Trasducer input voltage: 5 Vdc (max. 230 mA) |
Frequency signal acquisition: 12.5 ÷ 300 Hz |
Visible resolution (in divisions): 999999 |
Divisions value (adjustable): x1, x2, x5, x10, x20, x50 |
Decimal figures range: 0 ÷ 4 |
Temperature range: -10 ÷ + 50°C (humidity max 85% no condensation) |
Storage temperature: -20 ÷ +70°C |
Filter: 5 ÷ 250 Hz |
Logic output: 2 relays, Max. 48 Vac/Vdc, 2A each |
Logic input: 2 opto-isolated at 12/24 Vdc PNP (external power supply) |
Serial port: 1 USB device + 1 RS232C + 1 RS485, Fieldbus, ASCII or Modbus RTU |
Analog output Non-Linearity: < 0,02% |
Temperature drift analog output: 0,001% FS/°C |
Power supply: 12-24 Vdc ±15% - Power consumption 4 W |
Microcontroller: ARM Cortex M0+ at 32 bits, 256KB Flash reprogrammable on-board from USB |
Data storage: 64 Kbytes expandable up to 1024 Kbytes |
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology |
Number of load cells: 1 ÷ 8 |
Dimensions: 100 x 75 x 110 mm (L x H x P) |
Weighing Instrumentation
Weight Indicators

- Touch screen weight indicator perfect for any type of weighing
- Practical, easy to install and use
- Perfect for static weighing and loading-unloading and multicomponent dosage
- Customizable according to necessity
- Multilingual menu
- 6 inputs and 6 outputs (optoisolated 24 Vdc)
- Internal data memory 64 Kbytes expandable up to 1024 Kbytes
- Fieldbus + analog output on board at the same time
Power supply: | 5 Vdc (max 8 -350 Ohm- load cells) |
Measuring range: | -3.9 ÷ +3.9 mV/V |
Input sensitivity: | 0.02 microV min |
Linearity: | < 0.01% FS |
Temperature drift: | < 0.001% FS/ °C |
Display: | graphic LCD (240x128 pixel) |
A/D converter: | 24 bit; internal resolution up to 16.000.000 |
Frequency signal acquisition: | 12 ÷ 1000 Hz |
Displayable resolution: | 999.999 displayable divisions on net weight |
Value divisions (selectable): | x1, x2, x5, x10, x20, x50; 4 decimal point |
Filter: | selectable 0.1÷250 Hz |
Keyboard: | 4 wires resistive touch screen |
Power supply: | 10-30 Vdc - Power consumption 5 W |
Operating temperature: | -10/+ 50°C (humidity max 85% no condensation) |
Storage temperature: | -20 ±+70°C |
Logic outputs: | 6 opto-isolated; max 24 Vdc/100mA each |
Logic inputs: | 6 optically isolated 24 Vdc PNP (external power supply) |
Additional I/O: | up to 4 external modules with 4 in/8-out each (16 in/32 out, total) by independent RS485 |
Serial ports: | 1 USB device + 1 RS232C + 1 RS485/Fieldbus |
Optional analogue output: | optoisolated 16-Bit Voltage: 0 to 5/10 V (R min10 K Ohm), Current: 0/4 to 20 mA (R max 300 Ohm) |
Analog output calibration: | keyboard (touch screen) |
Analog output linearity: | < 0,02% FS |
Temperature drift analog output: | 0,001% FS/°C |
Microcontroller: | ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB |
Data storage: | 64 Kbytes expandable up to 1024 Kbytes |
Regulatory Compliance: | EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety, EN45501 for metrology |
Electrical connections: | removable screw terminal blocks (3.81mm pitch) |
Dimensions: | 150x95x26mm (LxWxH) including terminal blocks; 150x95x56mm (WxHxD) with fieldbus options; drilling template: 138x82mm |
Mounting type: | panel mount |
Communication protocols: | ETHERNET 10/100 con protocolli TCP, MODUBUS/TCP, UDP, IP, ICMP, ARP; PROFINET; ETHERNET/IP; ETHERCAT |